Tiering System

Explanation

Our tiering system is based on hierarchical tiering. This considers a hierarchical scale, these are the uncountably infinite higher size attributed to reaching a higher level of hierarchy.

Since human characters are the most prevalent throughout all of fiction and we understand the energy levels in the standard universe (due to existing in it), the power of the standard universe is split into many levels encompassing the majority of this system. This ranges from below the energy level of an average human to infinite energy on the first hierarchical scale. This hierarchy falls under our standard laws of physics.

After transcending this one it extends into the next hierarchy, this usually extends into a multiverse's cosmology. This standard hierarchy is beyond the regular singular space-time continuum of the universe. One can go higher and higher depending on the cosmology and the setting of the verse.

The scale culminates in characters transcending hierarchy, who we fittingly scale via layers of transcendence. All possible levels of power are included within our tiering system due to the lower/higher/transcendent hierarchies ratios being as broad as they are.

In most cases, tier 11 is a mostly unused tier as the physical world (aka the world we live in), is generally the lowest level of reality in the verse. Though in some cases an author will use spatial dimensions in the sense of higher and lower infinites and in those cases the distinction for tier 11 is used. Along with this there are some verses where the physical world has lower layers of reality beneath even it and characters would qualify for tier 11 in this.

To add on, spatial dimensions are not considered as higher planes of reality or higher hierarchies by default, however temporal dimensions are considered as such, to briefly explain, temporal dimensions in fiction are treated as higher layered timelines beyond the regular scope of the traditional physical world.

The Tiers

Tier 11: Lower-Hierarchal

Hierarchies lower than the standard real world. These are realms with lower narratives that the standaradized regular human society are uncountably infinitely beyond. Do not confuse this for reality to fiction gaps as those are a higher layer being treated as our standardized real world when in reality it is a hierarchy beyond space and time and our real world.

11-C: Low Infraverse level

The characters in question are completely below the hierarchy by any amount of layers beyond two. These characters are so uncountably infinitely lower then a standarized hierarchy that in most cases they'd be mistaken for being unperceivable and lacking a standard existence.

11-B: Infraverse level

The characters in question are completely below the hierarchy by two layers.

11-A: High Infraverse level

The characters in question are completely below the hierarchy by one layer.

Tier 10: Regular

The standard physical world. The Real World is a common example of characters that live under this tier.

10-C: Below Average Human level

Characters who are physically impaired beings or small animals. They tend to be depicted as the child character in a fictional verse or have an immense sickness that causes their body to be far weaker than the average human.

10-B: Average Human level

Characters who are comparable to or just exist as a normal human. These characters could have some significant feats to them but overall have a normal average standout to them that any other human has.

10-A: Athlete level

Characters who are proficient in sports and other forms of physical exercise, these are mostly characters from action movies.

Tier 9: Superhuman

9-C: Peak Human level

Peak Humans to Low Superhuman. Few physically very strong Olympic level athletes and martial artists in real life. Most protagonists and final villains from action/martial arts movies. Large animals.

9-B: Wall level

Characters/Weapons who can destroy a wall, or those who can easily harm characters with wall level durability. Very large animals.

9-A: Room level

Characters/Weapons who can destroy a room, or those who can easily harm characters with room level durability. Extremely large animals.

Low 8-C: Small Building level

Characters/Weapons who can destroy a small building level, or those who can easily harm characters with small building level durability. Extremely large animals.

8-C: Building level

Characters/Weapons who can destroy a building, or those who can easily harm characters with building level durability.

High 8-C: Large Building level

Characters/Weapons who can destroy a large building or a small skyscraper, or those who can easily harm characters with large building level durability.

8-B: City Block level

Characters/Weapons who can destroy a city-block, or those who can easily harm characters with city-block level durability.

8-A: Multi City Block level

Characters/Weapons who can destroy multiple city-blocks, or those who can easily harm characters with multi city-block level durability.

Tier 7: Nuclear

7-C: Town level

Characters who can destroy a town, or those who can easily harm characters with town level durability.

7-B: City level

Characters/Weapons who can destroy a city, or those who can easily harm characters with city level durability.

7-A: Mountain level

Characters/Weapons who can destroy a large mountain, or those who can easily harm characters with mountain level durability.

Tier 6: Tectonic

6-C: Island level

Characters/Weapons who can destroy a large island, or those who can easily harm characters with island level durability.

Low 6-B: Small Country level

Characters who can destroy a small country, or those who can easily harm characters with small country level durability.

6-B: Country level

Characters who can destroy a country, or those who can easily harm characters with country level durability.

High 6-B Large Country level

Characters who can destroy a large country, or those who can easily harm characters with large country level durability.

6-A: Continent level

Characters who can destroy a continent, or those who can easily harm characters with continent level durability.

High 6-A: Multi Continent level

Characters who can destroy multiple continents, or those who can easily harm characters with multi-continent level durability.

Tier 5: Planetary

5-C: Moon level

Characters who can destroy a moon, or an astrological object of similar proportion.

Low 5-B: Small Planet level

Characters who can destroy a small planet, or those who can easily harm characters with small planet level durability.

5-B: Planet level

Characters who can create/destroy a planet.

High 5-B: Large Planet level

Characters who can create/destroy large gas giants such as Jupiter and Saturn.

5-A: Brown Dwarf level

Characters who can create/destroy a brown dwarf.

Tier 4: Stellar

Low 4-C: Low Mass Star level

Characters who can create/destroy stars with a small solar mass.

4-C: Star level

Characters who can create/destroy a star.

High 4-C: High Mass Star level

Characters who can create/destroy stars with a massive solar mass.

4-B: Solar System level

Characters who can create/destroy a solar system.

4-A: Multi Solar System level

Characters who can create/destroy multiple solar systems.

Tier 3: Cosmic

3-C: Galaxy level

• Galaxy level ("3-C"): Characters who can create or destroy a galaxy.

• Multi Galaxy level ("High 3-C"): Characters who can create or destroy multiple galaxies.

3-B: Galaxy Cluster level

Characters who can create or destroy galaxy clusters, which typically contain hundreds to thousands of galaxies.

3-A: Supercluster level

• Supercluster level ("3-A"): Characters who can create or destroy galactic superclusters, which contain thousands to hundreds of thousands of galaxies.

• Multi Supercluster level ("High 3-A"): Characters who can create or destroy cosmic structures on a scale beyond the theoretical limit of the cosmological principle, ranging from multiple superstructures to all of the matter in the universe. Characters who can create or destroy an infinite amount of matter will receive a "+" for this level.

Tier 2: Macrocosmic

2-C: Universe level

• Low Universe level ("Low 2-C"): Characters who can control, create, or destroy the spacetime continuum of a realm that is less than universal in size. Examples of this would be pocket universes that are shown to have completely separate spacetimes from their parent universe.

• Universe level ("2-C"): Characters who can control, create, or destroy entire universes. This level goes beyond creating or destroying all physical constituents of the universe at any point in time, instead completely wiping out the past, present, and future entirely.

2-B: Multiverse level

• Low Multiverse level ("Low 2-B"): Characters who can control, destroy and/or create a multiverse with a definable size. The power difference between 2-C and Low 2-B characters is not possible to exactly quantify, given that the latter category has to breach the distance between universes along an unquantifiable distance.

• Multiverse level ("2-B"): Characters who can control, create and/or destroy countless numbers of universes. This multiverse is of undefined size.

• High Multiverse level ("High 2-B"): Characters who can destroy and/or create a countably infinite number of universal space-time continuums.

2-A: Hyper Multiverse level

This category Hyper Multiverse level ("2-A"): Characters who are above the standard hierarchy of the Multiverse or first hierarchal universe. One of the ways to reach this is conceptually transcending space and time in an infinite amount of standard universes in the Multiverse. Characters who can destroy and/or create an uncountably infinite number of universes may potentially also be assigned this tier, as the extent of uncountably infinite universes reach into a new hierarchy.

Tier 1: Hierarchical Magnitudes

1-C: Complex Multiverse level

These are characters that exist within higher hierarchies of reality. In terms of infinitely superior dimensions these characters would be 6-11 hierarchical transcendences. One above the standard hierarchy of a 2-A multiverse can logically easily destroy a more than countably infinite number of 2-A space-time continuums, and higher hierarchical characters extend further beyond.

This category is separated in the following manner:

• Low Complex Multiverse level ("Low 1-C"): Characters who exist beyond the standard hierarchy of a 2-A multiverse. Characters can go beyond even this level of hierarchy however, reaching beyond even a Low 1-C multiverse. Do note for characters that reach this level should receive the rating Low Complex Multiverse level+ to differentiate the levels of hierarchy the characters are on.

• Complex Multiverse level ("1-C"): Characters who exist beyond the previous layered reaching even higher levels. Alternatively ones that are positioned at an unknown/unspecified level within this category. Characters that transcend a 1-C multiverse should receive the rating Complex Multiverse level+ to differentiate the levels of hierarchy the characters are on.

• High Complex Multiverse level ("High 1-C"): Characters who exist beyond the previous layered reaching beyond a 1-C+ multiverse. Characters that transcend a High 1-C multiverse should receive the rating rating High Complex Multiverse level+ to differentiate the levels of hierarchy the characters are on.

1-B: Metaverse level

These are characters that exist beyond the complex multiversal scale hierarchy, beings reach 12 hierarchical transcendences and above.

Under our system of hierarchical scaling, a Low 1-B character is more than countably infinite number of times greater than a High 1-C character, the characters above Low 1-B hierarchies are higher into the hierarchical system reaching higher levels of uncountably infinite.

This category is separated in the following manner:

• Low Metaverse level ("Low 1-B"): Characters who existed beyond the complex multiversal hierarchies ranging in power, reaching up to 8 hierarchical transcendences all the way to 26 hierarchical transcendences. It should be noted that characters with 26 hierarchical transcendences should be Low 1-B+.

• Metaverse level ("1-B"): Characters who exist beyond the previous hierarchies, existing in a finite amount of hierarchies having power comparable to one who is above a Low 1-B+ hierarchy.

• High Metaverse level ("High 1-B"): Infinitely stacking hierarchies to uncountably infinite stacking hierarchies. It should be noted merely transcending this hierarchy does not automatically grant Low 1-A as one more exist fully beyond it on every conceptual level.

1-A: Cantorverse level

Characters that exist beyond or can affect a realm beyond infinite hierarchical layers. In order to describe these characters, we need to use mathematical sets. This tier is named after Georg Cantor, the mathematician that created set theory.

This category is separated in the following manner:

• Low Cantorverse level ("Low 1-A"): Characters that exist beyond a set of infinite hierarchical layers to any higher accessible set of hierarchies. By equating infinite hierarchical layers to a set, we can represent it as aleph null, with anything that exists outside of it falling under this tier.

• Cantorverse level ("1-A"): Characters that exist on such a scale that their existence cannot be reached by using set replacement. Using set theory, we can equate this level to inaccessible cardinals.

• High Cantorverse level ("High 1-A"): Characters whose level of existence cannot be described using set theory. Characters at this level are so incomprehensibly powerful that they cannot properly be described by mathematics, and as a result, trying to discuss the difference in power between characters in this tier is meaningless, as we lack the comprehension to truly assign them any value at all.

For more information on set theory, please watch this excellent video on the subject by Vsauce.

Tier 0: Boundless

0: Boundless

Beings that boundlessly exceed everything on every level within their respective franchises and every hierarchy, which include any Cantorversal beings, transcendent beings, existence and non-existence, possibility, causality, contradiction, dualism and trans-dualism, concepts, hierarchies and their analogues at any level. Boundless beings are on top of everything within their respective franchises and their existence are completely featless and impossible. They cannot be compared nor contrasted with each other as there is no feasible way to measure their strength, not even their size can be measured as them being "infinitely big" as they are beyond any form of mathematical understanding or measure, "infinity" is nothing to them and a concept they are far beyond (though a character describing them as such due to a lack of comprehension of the being will not contradict said beings tiering). Take note the difference between a High Cantorversal being and a Boundless being is so high that it goes beyond the difference between a High Cantorversal being and a Cantorversal being.

Note: If the said being isn't on top in their verse or is surpassed by other beings then they aren't tier 0. There can also not be more than one tier 0 as this would imply there is something to combat its power when it's power is not remotely measurable beyond any form or extent. There should also be no real weakness for the being as that would imply there is still some form or concept they're bound by. "Weaknesses" such as not being omnipresent or omniscient do not count however.

Additional terms

At least

Should be used to denote the lower cap of a character, if the exact value is indeterminate. Usually listed for characters that have done a feat superbly casually.

At most

Should be used to denote the higher cap of a character, if the exact value is indeterminate. Usually listed for characters that have done a feat that is questionable compared to their other feats.

Likely

Should be used to list a hypothetical statistic for a character, but inconclusive due to lack of feats or viable power-scaling. Probability of said hypothetical statistic should be favourable.

Possibly

Should be used to list a hypothetical statistic for a character, but inconclusive due to lack of feats or viable power-scaling. Probability of said hypothetical statistic should also be indeterminate.

Important Notes

• Do note that having theories such as String theory does not automatically give a High 1-C cosmology. In the standard models of string theory the dimensions are compact to an extremely small scale and not uncountably infinitely higher dimensions, for it to reach High 1-C the dimensions would need to be proven uncountably infinitely larger than the last.
  • Do also note that concepts such as platonic concepts are not automatically 1-A nor any tier. Platonic Concepts are concepts, which are not tangible or tierable and thus they have no place on the tiering system. Along with this the justification for 1-A does not meet our 1-A standards as transcending space and time is not enough for 1-A.

• Another thing to note that the tiering system and a character’s dimensionality are not interchangeably connected. One can have far higher dimensionality while also having a far lower tier than expressed. For example Jeem (Hydlide) is listed as possibly 6-D dimensionally but he is physically 7-C at his peak. Dimensional tiering is only in the case of one’s dimensionality and has nothing to do with the Tiering System, AP, Durability, Speed, etcetera.
  • The reason dimensional tiering is not used for the tiering system is because higher spatial dimensions aren't inherently higher levels of infinity but rather different axis from the 3rd dimension. They do not grant a higher level of tier or Attack Potency, rather just extra abilities that come with Higher-Dimensional Existence.
  • As noted above temporal dimensions still apply due to how they work compared to spatial dimensions. A spatial dimension is merely another space axis in movement, while a temporal dimension is essentially the difference between 2-C and 3-A. A temporal axis contains an uncountably infinite number of copies of the spatial volume of the universe, adding in another temporal axis would thus make another axis with an uncountably infinite amount of copies thus creating a higher layer of reality. This is the reason temporal dimensions still apply instead of spatial dimensions. Though it should be noted to pay attention to context as a temporal plane doesn't instantly refer to a time axis but also relate to secular/worldly affairs. Which has nothing to do with the higher tiers.

• Please do also note the destruction of something does not equate to its namesake. While destroying a city can be city level there are times where it could be higher or lower depending on the method of destruction.

• Being stronger than a 2-C or your previous 2-C form does not grant you Low 2-B alone. It is impossible to quantify the numerical gap between each one of the subtiers in Tier 2 due to the distance between any given number of universes is currently unknowable. This also goes for being "infinitely" stronger then 2-C too, that does not grant you High 2-B. The same with a 2-B being infinitely stronger.

• According to the first version of the definition of the Hausdorff dimensions, one easily sees that the dimension of the unification of countably infinite n-dimensional objects is also a n-dimensional object. Or in other words, stacking countably infinite objects together never reaches a higher-dimension.
  • The same can be said for hierarchies. Stacking countable infinite objects together will never reach a higher hierarchy.

Discussions (Link For Mobile Users):

Discussion threads involving Tiering System