Site FAQ

Important Codex Wiki Articles
Important Pages	Site FAQ - General Help Page- Tiering System - Civilization Tiering System - Rules for Character Profiles - Common Editing Mistakes - Disclaimer - How to Handle Calculations - Universe - Multiverse - Omniverse - Projectile Dodging Feats - Dimensional Tiering Explanation - Common Terminology - Discussion Rules - Reference for Common Feats - Rules for Acceptable Profiles - Rules for Fanon Profiles - Misleading Titles - Mistranslations - Outside Wiki Standards - Statements - Verse Cosmology Categorizations
Terminology	Alignment - Status - Dimensionality - Attack Potency - Durability - Speed - Reactions - Lifting Strength - Striking Strength - Range - Intelligence - Hax - Equipment - No Limits Fallacy - Omnipotence - Cinematic Time - Canon - Crossover - Multipliers - Environmental Destruction - Bloodlust - Chain Reactions - Outside Help - Space - Spite Threads - The Kardashev Scale - Infinity - Light Speed - Requirements for Speed of Light/Faster Than Light Speeds
Standards	Transcendence - Creation vs Destruction - Outlier - Ludonarrative Dissonance - Inconsistency - Plot-Induced Stupidity - Reality - Fiction Interaction - Powerscaling - Black Hole - Wormhole - Stabilization Feats - Merging Feats - Embodying Feats - Data World Standards - Dream World Standards - Standard Battle Assumptions - One-Shot - Speed Blitz - Penetration Damage - Death of the Author - Versus Threads - Information Pages - Light Dodging Feats - Lightning Standards - Timeless Void Standards
Formats	Standard Format for Character Profiles - Standard Format for Factions - Standard Format for Cosmic Forces - Standard Format for Verse Pages - Standard Format for Locations Profiles - Standard Format for Weapon Profiles - Standard Format for Powers and Abilities - Standard Format for Civilization Profiles - Standard Format for Category Names - Standard Templates For Tabbers

The Codex FAQ

---

Part I: Tiering System

Q: Why don’t we use dimensional tiering?

A: Dimensional tiering is a system of tiering fictional characters that automatically assumes higher dimensions are qualitatively infinitely superior to lower dimensions. It is an inherently flawed idea because of this very reason, as spatial dimensions are simply axes of movement, they do not constitute for higher infinities in the way that some people may think they do. The forces responsible for determining attack potency, such as mass and acceleration, are not correlated to dimensionality in any way. To highlight this difference, destroying a 10+1 dimensional universe is no different than destroying a 3+1 dimensional universe in terms of attack potency. For more information, visit our Dimensional Tiering Explanation page.

Q: So additional spatial dimensions aren’t viable for tiering, but what about temporal dimensions?

A: Temporal dimensions are in the same boat. Though they're more impressive for specifically 2-C. Destroying the timeline of a universe involves the destruction of the universe at every single point in time, thus warranting a higher tier under our system. This is the reason 3-A and 2-C have a difference between them.

Q: Are there situations where dimensional tiering is applicable?

A: If the verse in question specifically portrays higher dimensions as higher layers of infinity, dimensional tiering can be applied. It is only when you try to apply dimensional tiering to verses that treat dimensionality the same as the real world that the idea begins to fall apart.

Q: Hold on a second… the tiering system here is different! Why is that?

A: Initially our tiering system was largely adapted from other power scaling wikis, though after various revisions, we have made it into its own unique system. These changes were made to make the tiering system more consistent and easier to understand. The specific changes can be seen by visiting our tiering system page.

Q: So then, how do we handle 1-C and above?

A: Rather than using higher dimensions as higher infinities, we handle tier 1 based off George Cantor's level of infinites, where there's higher order of infinities.

Q: But what were the specific changes made between tier 3 and tier 2?

A: The changes are the following:

• High 3-C: High 3-C is now where Multi-Galaxy level is, instead of 3-B.

• 3-B: 3-B has changed from Multi-Galaxy level to destroying an entire galaxy cluster, which typically contain hundreds to thousands of galaxies.

• 3-A: 3-A's name no longer uses universe level as the universe is officially defined as a universal space-time, which is our reasoning for reaching 2-C. Thus 3-A instead uses galactic superclusters as they are the largest cosmic structures of the universe, essentially putting a fitting end to tier 3's cosmic structures.

• High 3-A: High 3-A has now become Multi-Supercluster level, this is where cosmic structures are on a scale beyond the theoretical limit of the cosmological principle. Allowing for multiple superstructures to all of the matter in the universe, whether finite or infinite.

• Low 2-C: Low 2-C no longer represents destroying a single universal space-time, as it is now 2-C.

• 2-C: 2-C has been renamed to Universe level to differentiate as the definition of the universe is the whole space-time. This is due to Low 2-C moving to Low Multiverse level and then 2-B being Multiverse level was an odd inconsistency with the old tiering system.

• 2-B: 2-C [Low Multiverse level] has been moved to a new tier, that being 2-B. Additionally, the name has been changed to Multiverse Cell level. The reasoning for this is that our terms for tier 2 are based off scientific basis, and thus our using of the term "multiverse" should reflect this. The most relevant multiverse models that are commonly studied are ones that results in a countless number of universes or an infinite amount of universes, thus model wise, 2-B now falls under an assumption that a character performed a feat equivalent to destroying a portion of a countless or infinite multiverse model. Along with this, for 2-B rather than having an arbitrary upper limit of 1,000 universes [the old 2-B], this tier will be used for any finite multiverses that have a defined size, or multiverses that cannot be extrapolated to contain countless universes, or destroying sections of a countless or infinite universe..

• 2-A: This tier will now exclusively be assigned to finite multiverses that have no defined size, or contain countless universes so to speak. Usually a multiverse of ad infinitum or ever-growing size.

• High 2-A: Initially this tier was used to describe "5-D" in the old dimensional tiering system, it is now used to define a multiverse of infinite size.

• 1-C: This promotes the start of the levels of infinity, and specifically deals with the first level.

• Low 1-B: This promotes going to any definable infinities beyond 1-C, similar to how 2-B is based off any finite multiverse with a defined size, Low 1-B is based off any finite infinite transcendence with a defined size/cannot be extrapolated to contain countless infinities.

• 1-B: This will encompass countless infinities transcendences.

Q: What’s up with 1-A? Why is it so much different than how other wikis treat it?

A: To explain why we handle 1-A differently, we must explain the flaw with our initial 1-A. To start, the idea of 1-A on used to be based on the idea of dimensional tiering. To be 1-A, one must be superior to the concept of dimensions itself, of course, the problem with this being that since dimensions are not used for tiering, being superior to the concept of them shouldn’t account for tiering either. This leads to certain verses being massively inflated due to having dimensionless characters or realms, when they should be much lower on a system that is purely based on levels of infinity. Our 1-A simply consists of characters that reach essentially an inaccessible cardinal or Level IV Multiverse, regardless of whether or not they are dimensionless. For the specifics on how we handle the sub tiers of 1-A, check out our tiering system page.

Q: Alright, so how do we treat transcending?

A: Transcendence, in its truest nature, would reflect our High 1-A rating, as a true transcendent beings is unbound by and beyond everything, thus mathematics and infinity cannot describe them. Though this does not mean everyone with Transcendence gets High 1-A, instead one needs to meet the requirements of the truest nature of Transcendent in order too. For other characters with transcendence, it is treated as merely an ability as there is nothing prove one transcendent of space and time are infinitely superior to everything within the cosmos.

Q: Does moving in higher spatial dimensions grant Extra-Temporal speed?

A: Not quite. Extra-Temporal speed is limited to High 1-As as those are beings that cannot be described by mathematics. Going into a higher spatial dimension does not put your in this state as you’ve merely went into a higher space dimension. Being granted more directions/axis does not upgrade or make you any faster for instance you are still bound by the past, present, and future; you can just look at these angles from different axis now.

Q: Is it possible to be for a non-High 1-A to get Extra-Temporal speed?

A: For characters below High 1-A Extra-Temporal speed has been agreed upon to be removed, this is due to the fact that it in essence is not a speed as it's one being beyond the formula for speed, thus instead this would be an ability. This is consistent with fictions portrayal of characters normally beyond time not really being treated as a speedster.

Q: How is transcending space-time treated here?

A: Transcending space-time is an incredibly case by case scenario. For example, it could grant one Time Travel, it could grant one a resistance to Space-Time Manipulation, it could grant one Acausality, or it could grant all the above.

---

Part II: Wiki Usage

Q: I want to start making pages, is there anything I’m not allowed to create?

A: You may make a page for any character as long as you are knowledgeable on the verse in question. Though it is requested that you make note a verse you're planning on doing. If you wish to make pages for an existing verse, please contact the knowledgeable members listed on the verse page to discuss the tiering with them, as many verses are still being worked on and the members in question may already be developing a page for the character page you wish to create. Of course, if the character you wish to create is from a fanon verse, be sure to thoroughly read our rules regarding fanon characters to see if they’re viable for the wiki. When making a page, please copy the code from the standard profile format page and build on it to make your new page.

Q: There is information on a page I found that I think is incorrect, what do I do?

A: Rather than editing pages yourself, you can go on a character or verses "Talk:" section of their page to propose possible changes. After all, this is a community based wiki, and many of the profiles on it were made by users collaborating with one another. Alternatively you can join our discord and talk about changes to a profile there (requests for a link require sending a discord DM to GiverOfThePeace, discord: ck_skies).

Q: Who should I message if I have questions regarding the wiki that aren’t answered here?

A: Simply contact one of our active bureaucrats or administrators. Before asking a question, make an effort to find the information on the wiki yourself. Only resort to asking the aforementioned staff members if you genuinely are unable to find the answer as to not waste anybody’s time.

Q: How is a discussion thread accepted?

A: A discussion thread is accepted once there has been an overall agreement on said proposal that meets the standards of the wiki.

Q: What about if the mods accepted it and none of the knowledgeable members?

A: It’d be the same as a regular user accepting it, they have no extra addition to what can or cannot be added.

Q: Then what is the job of a mod on the thread?

A: Moderators all are tasked with mediating a thread to make sure it doesn’t go out of control, along with this the only other true say they have above a regular user is explaining how something meets our standards.

Q: Why is there not a supporters/opponents/neutral section on verse pages. What is the “knowledgeable members” section?

A: The supporters/opponents/neutral section of the verse page was deemed completely pointless and detrimental in most cases. Viewing this upon other wikis it was common to see if someone was listed as an opponent they would have their takes or input be taken with a grain of salt just for disliking the verse. Along with this, all that truly matters is whose knowledgeable on said verse, we do not need to know where one’s opinions lie on the quality of it. Along with this, there have been tactics in the past for people to dishonestly put themselves in places like neutral or supporters to get away with sabotaging threads. Overall it was deemed completely pointless and negative in the long run, and thus scrapped. The knowledgeable members section is exactly what it says, a section for people knowledgeable on the verse to add themselves. It should be noted that if you want to put yourself under knowledgeable members you should be expected to reply to threads regarding said verse.